-Team
29.05.2007, 15:07
ich nehm jetzt mal an das des heir die eignetliche anleitung ist?
For the fronts, facelift version:
1-remove lights from car
2-remove al bulbs and igniters
3-remove headlight washers and covers
4-remove trim rings, this is actually the hardest part without breaking them.
5-Set oven to 230 degrees
6-heat on cookie sheet for 6 minutes
7-wearing gloves pry the lens off. Just work around the edges and it will slowly give, No tools needed
8-removechrome bits you want to paint
9-use tilt adjustment screws to aim HID as low as possible to be able to pop the chrome surround off the HID projectors
10-paint with regular old Krylon fusion in the color of your choice, Satin finish recommended here
11-allow to dry
12-reassemble
13-reheat to 230 for 6 minutes
14-press lens back on after making sure all finger prints are removed
15-re install bulbs, rings and back on car
16-re-aim the assemblies
17-enjoy!
wird beim prefacelift ja des selbe sein oder?
gibt es im netz nen übersetzungsprogramm oder muss ich des meienr tante schicken?
For the fronts, facelift version:
1-remove lights from car
2-remove al bulbs and igniters
3-remove headlight washers and covers
4-remove trim rings, this is actually the hardest part without breaking them.
5-Set oven to 230 degrees
6-heat on cookie sheet for 6 minutes
7-wearing gloves pry the lens off. Just work around the edges and it will slowly give, No tools needed
8-removechrome bits you want to paint
9-use tilt adjustment screws to aim HID as low as possible to be able to pop the chrome surround off the HID projectors
10-paint with regular old Krylon fusion in the color of your choice, Satin finish recommended here
11-allow to dry
12-reassemble
13-reheat to 230 for 6 minutes
14-press lens back on after making sure all finger prints are removed
15-re install bulbs, rings and back on car
16-re-aim the assemblies
17-enjoy!
wird beim prefacelift ja des selbe sein oder?
gibt es im netz nen übersetzungsprogramm oder muss ich des meienr tante schicken?